Facing Violence and Oppression Essay

The Kurds comprise a population in the Middle East that is currently mostly dispersed throughout the outskirts and borders of Turkey, Iraq, Iran, and Syria. Having their own way in expression through arts and sociopolitical organization, they are characterized with their own culture and history (Levinson 175). In relation to the fact that they are dispersed along such locations, an implication arises that they currently do not belong to a country that unifies their race. Hence, as a result, the Kurds have often been considered as the oppressed in the Middle East and selected against by the governments of the countries in which they reside. In some instances, the Kurds have even opted to engage in conflicts in order to preserve their history, culture, rights, and even their lives (Amnesty International 6). Through history, there have been several cases wherein the Kurds have been heavily violated. One significant proof of such was the event in 1965 where an Arab Cordon was decided to be made by the Syrian government. The Kurds, during that time, were found to live in the borders of Turkey which is considered part of the Jazira region; however, upon the actualization of the Arab Cordon, the Kurds were displaced and were transferred into a desert area (Kurdish Canadian Congress [KCC]). This was significantly a breach upon the lives of the Kurds in the area since the place they considered as their home was suddenly stripped away. In fact, the Kurds already integrated their culture into what was originally their home. In addition, even though they were originally from a desert area, relocating the Kurds to a desert area without further support posed several problems such as reestablishment. Additional aggravating details regarding the production of the Arab Cordon include the changes that they made in the location. Aside from simply taking away the homes of the Kurds, the Arabs also prevented any trace of the culture of the Kurds to remain in the area; in fact, they even opted to rename the villages to fit their own language (KCC). As expected, such an event was not well-received by the Kurdish locals, and as a result, some refused to comply. Those who did not choose to be relocated were branded as outsiders by the Arabs and were not allowed to regain any type of settlement in the area (KKC). Understandably, due to the continuous oppression towards their kind, groups of Kurds that saw fighting as the only way to gain recognition started to appear throughout the Middle East. In response to these resistance forces of the Kurds, the Iraqi government decided to mobilize an attack which would eliminate most Kurds in the Iraqi territory; the attack was referred to as Al-Anfal. Biological and chemical weapons were used against both Kurd resistance members and Kurd villagers alike; this resulted in the death of over 180,000 Kurds (O’Leary). Such an outright attack upon a large group of Kurds is considered as genocide. The reason behind the Al-Anfal, which was led by Ali Hasan Al-Majid, was to destroy and eliminate saboteurs (O’Leary). Although it was more of a case of ethnic cleansing rather than just eliminating the threats or defeating the opposition, the occurrence of such attacks to the Iraqi Kurd population did not actually begin and end with the Al-Anfal. In fact, throughout the course of such violent attacks, over 300,000 Kurds have died (O’Leary). In contrast to the blatant attack of the Iraqi government towards the Kurds, in Turkey, they were considered as people that one should never speak of. In fact, even though there were a considerable number of Kurds in Turkey, decades ago the Kurdish language was banned and was not to be used in Turkish regions in order to cause further cultural repression. In addition, public perception and knowledge towards the Kurds were maintained to a level wherein Kurds were thought of as mountain Turks (Bruno). As a result, several groups that were against such treatment, including the Kurdistan Workers Party (PKK), decided to fight for their beliefs and rights. The original aim of the PKK was to acquire an independent state for Kurds and hence, be able to govern their own kind; the PKK was considerably stronger and more radical in their ways compared to previous resistance groups discussed, as they usually resorted to kidnapping and terrorism (Bruno). Even with such a difference in those aspects, the general aim of the resistance groups, and probably the whole Kurd population, is to be able to develop their own state or country where they may freely express their own culture and other aspects of their population without the fear of being selected against, discriminated, or oppressed. The same trend can be observed in the history of Kurds in Iran. It is important to note that Iran played an important role in the destruction of the first step of the Kurds towards autonomy. In 1946, after gaining control of Mahabad, wherein the Kurds established the Kurdish Republic of Mahabad, the Iran forces seized the area without giving much time for the republic to at least develop (Kweskin). Hence, the opportunity of the Kurds to experience autonomy was definitely cut short, and as a result, movements that aim to bring autonomy to their kind began anew. In 1979, further cases of oppression towards Kurds were documented in Iran, one of this being the aggressive way of control towards the Kurd revolution initiated by the Ayatollah Khomeini, which was inducing revolutionary rule upon the area of Mahabad; the Ayatollah Khomeini branded the Kurds as atheists in order to explain their actions (Kweskin). The leader of the Kurds in Mahabad strictly denied any form of religion-based actions or motives. The leader exclaimed that the only thing they wanted to attain was for Kurds to achieve independence once more and again be able to rule themselves and let their own ways of living flourish (Kweskin). In the current times, the treatment towards the Kurds has become better, as exemplified by the recent move of the Turkey government to allow Kurdish language to be used as well as several Kurdish media to be transmitted (Bruno). However, in general, the Kurds are still commonly associated with oppression and abuse. For example, in Iran, the oppression towards Kurdish individuals is still evident in the unequal treatment of the laws and government of Iran towards them; evident risks for Kurdish women causing illiteracy and deaths due to improper treatment were found as well (Amnesty International 14). In addition to this, due to the formation of several Kurdish militant groups which aim to fight for their rights through force, the Kurds are becoming associated with terrorism as well; this is rather expected due to the fact that groups such as the PKK have conducted acts of violence in other parts of the world (Bruno). Given the current trend of the global community to prevent and extinguish any form of violence that arises from terrorist acts along with the fact that the masses have a tendency to generalize based on minimal facts, such activities definitely do not help in placing the Kurdish population in a positive light. However, it must be considered that all of these are based on the goal of the Kurds to establish their own identity and to be able to express aspects of their culture, including language, music, arts, and history, without outside intervention. It must be understood that if only this was fulfilled, then it is probable that the unnecessary oppression, death, and violence associated with the Kurds may never have manifested. Given the chance to form their own government and parliament, as seen through the Iraqi Kurdistan, the Kurds would be able to sustain themselves rather peacefully (O’Leary). Therefore, after all the dreadful events that these people had to experience throughout history, the Kurds should not simply be given several areas within current countries in order to practice a sense of autonomy as this still enables the presence of events of oppression; it is undeniable that the Kurds are more than deserving to finally form a true Kurdistan, a whole country in the Middle East with a future that the Kurds themselves will have the power to decide. Works Cited Amnesty International. â€Å"IRAN: Human Rights Abuses against the Kurdish Minority. † Amnesty International Online Library. 2008. 24 Apr. 2009 . Bruno, Greg. â€Å"Inside the Kurdistan Workers Party (PKK). † Council on Foreign Relations. 19 Oct. 2007. 24 Apr. 2009 . Kweskin, Benjamin. â€Å"Kurdish Nationalism from World War I through 2007: An Incomplete Historical Narrative. † Kurdish Media – News about Kurds and Kurdistan. 4 Sept. 2008. 24 Apr. 2009 . Levinson, David. Encyclopedia of World Cultures Volume IX: Africa and the Middle East. New York: G. K. Hall & Company, 1995. O’Leary, Carole A. â€Å"The Kurds of Iraq: Recent History, Future Prospects. † Middle East Review of International Affairs. Dec. 2002. 24 Apr. 2009 .

Research about plastic recycling Essay

1. Introduction The task for the students was to write about a topic that interested them, and to apply the learned knowledge and skills in connection with the course information literacy. First step was to get an idea of what to write, therefore brainstorming was the adequate method. With the gained information an own mindmap was created. Underneath, we can find both brainstorms, according to those brainstorms the topic has been chosen. Then the research question was formulated: â€Å"What should we do with our plastic rubbish?† Furthemore three subquestions were formulated: â€Å"What is the current situation of plastic pollution?† â€Å"How can we recycle our plastic rubbish?† and â€Å"Which are the best possibilities to recycle plastic?† The purpose of this research is to find out the damage that is caused by plastic rubbish and how to avoid it. Plastic rubbish is a global problem and affects us all. This research will be based on secondary research, so by existing literature. The following chapters describe the findings of this report. Firstly it explains the search plan, made to lead the research. Secondly summaries of two main articles will be given and judged upon their professionalism due to the help of the CARS checklist. A literature review of one of the summarized reports will be given. The report will also contain a chapter about plagiarism and research ethics, which are very important to remember while writing a report. Finally the last chapter â€Å"discussion and conclusion† summarizes the findings of this report. Table 1:Samuel Thà ¶nnes, course Information Literacy. Table 2: Samuel Thà ¶nnes, course Information Literacy. 2. Search plan 1. Search question: What is the current situation in plastic pollution? How can we recycle our plastic rubbish? Which are the best possibilities to recycle plastic? 2. Search terms: plastic rubbish worldwide, problems of plastic rubbish (worldwide), Recycling methods for plastic, most effective recycling methods for plastic, plastic recycling process, innovative plastic recycling methods 3. Information search method: internet search engines (google, bing), internet library HZ 4.Information sources used: scientific articles, reports, websites 3. Summary of the article â€Å"Global declaration on plastic pollution†. Nowadays people are in permanent contact with packages, bottles, toys and a lot more products consisting out of plastic. Most of the products end up as rubbish after the first hour they have been bought. About the question what  is happening to the plastic once it is thrown away, hardly anyone is thinking. The answer is simple, the plastic is coming back to cause even more damage. The way it comes back hardly anyone can imagine. It is coming back through our food chain, to fulfill its task, causing diseases to animals and finally to human kind, which is last in the food chain. For the last 60 years society has been using plastic in a wasteful way, with little concern in which ways this valuable, important and useful product can properly be disposed or recycled. The results are catastrophic, between 60 to 80 % of marine debris are in direct connection with plastic products. In the 5 largest gyres of our oceans enormous quantities of plastic are concentrated, with enormous consequences for the animals that live in the ocean. The consequences are going further to the food chain and human health. (Catto Fellowship Program, 2012, p.2) Plastic is not biodegradable, its decomposing into micro particles. Those tiny pieces are impossible to get out of the water, and the pollution degree is growing on a daily basis. The ocean plastic pollution can be identified as persistent, bioaccumulating and toxic substances. Due to chemical substances, as polychlorinated biphenol, PCBs, the pesticide DDT, several chronic health effects, as endocrine disruption, mutagenicity and carcinogenicity can be observed. (Catto Fellowship Program, 2012, p. 2) After summarizing the main facts of the pollution which can be traced to plastic rubbish, the next step is to find out what possibilities do we have to recycle the plastic. 3.1 CARS checklist on â€Å"Global declaration on plastic pollution†. CREDIBILITY: -Trustworthy source: As the article †Global declaration on plastic pollution† is a submission from the united nations conference on  sustainable development in advance of the Rio earth summit, I would call this source a very reliable one. – Author’s credentials: Detailed information are not given. Only given is that it is the Catto Fellowship Program an initiative from the UN. – Evidence of quality control: This article was published on the online site of the UN, which has to make sure that the quality of the published articles are good. – Known or respected authority/organizational support: The united nations are well known and have respected authority. Organizational support is also given through several experts, which is ubiquitous knowledge, that these kind of organizations have full access to any kind of expertise. Conclusion: The CREDIBILITY of this research is given. ACCURACY: – up-to-date(partially): The research was published in June 2012, nevertheless the used facts have not changed since then. – factual/detailed/exact: This submission contains detailed facts as it was prepared for the â€Å"Rio Earth Summit†. It is worked out in a very detailed way. -comprehensive: As 172 governments participated on the â€Å"Rio Earth Summit†, it was written in a very comprehensive way, which is also accessible to public. -Audience and purpose reflect intentions of completeness and accuracy: This document supports my own research, as it is giving me important facts about the world wide pollution of plastic rubbish. Conclusion: the ACCURACY of this research is given. REASONABLENESS: -Fair/ Balanced/ Objective/Reasoned: This document has been written in a very objective way, reasoned by facts, which have been researched through  experts. Furthermore that makes it fair and balanced. -No conflict of interest: We can find a conflict of interest between the research of the United Nations and large industrial companies, which are depending on the wasteful use of plastic. Despite the fact that this conflict of interest can not be found in the text, but relies on common sense. -Absence of fallacies or slanted tone: Nevertheless no slanted tone against anyone was found in the document, which makes it very objectively. Conclusion: The REASONABLENESS of this research is given. SUPPORT: – Listed sources: At the end we can find several companies which support the ideas of the United Nations. – Contact information: Contact information are provided through the United Nations itself, and can be found on their website. Conclusion: the SUPPORT of this research is given; as we could contact co-workers from the United Nations, to get more information. 3.2 Literature Review on â€Å"Global declaration on plastic pollution†. What is the specific topic of this article? The topic of this article is about the actual situation in plastic pollution world wide. What is the objective of this article? The objective of this article is to provide information about the world wide plastic pollution. In this case it was written for the â€Å"Rio Earth Summit. What are the theoretical assumptions? Assumption 1: Plastic pollution is a global problem. Assumption 2: A huge part of the ocean is affected by plastic pollution. Assumption 3: Plastic pollution is getting worse every day, and has to be stopped. How do the theoretical assumptions fit to your research? The theoretical assumptions do fit my research, because it answers the sub question â€Å"What is the current situation in plastic pollution?† Is there reference to specific concepts of theories/ What are the sources of information the author used? Unfortunately there are no specific information about the author. Only information about the organization, the United Nations, are given. What is the research method? The article has been written through expert opinions, which are working for the United Nations. Which type of material does the article present? As it is written from experts it contains their own field research. How did the author analyze and present the data? The data were presented relying on facts through expertise, so the author based the article on expertise. Does the author describe how the data could be interpreted? A clear description is not contain, the article only gives information about the actual plastic pollution situation and the consequences. What are the main conclusions in the article? As main conclusion it can clearly been identified that the actual situation is catastrophic and is even getting worse. 60 to 80% of marine debris are in direct contact with plastic pollution, the 5 largest gyres of our oceans show an enormous concentration of plastic pollution. This high concentration of plastic pollution results into our food chain being affected and finally being the cause for several diseases for animals and humanity. 4.Summary of the article „5 Stages of the Plastic Recycling Process† Defintion First of all it has to be clarified what plastic recycling means by definition: â€Å"Plastic recycling is the term given to the processing of waste plastic which turns old or scrap plastic in to a useable product which can then re-enter the manufacturing chain. In order for the plastic to be in a suitable format for re use in manufacturing environments such as by injection moulding companies the waste or scrap plastic, needs to go through several recycling processes†. (Daniel Marriott, 5 Stages of Plastic Recycling Process, 2011) Classify Numbers Before explaining the 5 stages of the plastic recycling process, the importance of the 7 numbers given to each plastic product while being produced, has to be explained. -Number 1 is used for â€Å"PETE†, which means Poly(ethylene terephthalate): Soda bottles, water bottles, vinegar bottles, medicine containers, backing for photography film. -Number 2 is used for â€Å"HDPE†, which means high-density Polyethylene: Containers for: laundry/dish detergent, fabric softeners, bleach, milk, shampoo, conditioner, motor oil.  Newer bullet proof vests, various toys. -Number 3 is used for â€Å"V†, which means Poly(vinyl cloride): Pipes, shower curtains, meat wraps, cooking oil bottles, baby bottle nipples, shrink wrap, clear medical tubing, vinyl dashboards and seat covers, coffee containers. -Number 4 is used for â€Å"LDPE†, which means low-density Polyethylene: Wrapping films, grocery bags, sandwich bags. -Number 5 is used for â€Å"PP†, which means Pol ypropylene: Tupperware ®, syrup bottles, yogurt tubs, diapers, outdoor carpet. -Number 6 is used for â€Å"PS†, which means Polystyrene: Coffee cups, disposable cutlery and cups (clear and colored), bakery shells, meat trays, â€Å"cheap† hubcaps, packing peanuts, styrofoam insulation. -Number 7 is used for â€Å"OTHER† Products labeled as â€Å"other† are made of any combination of 1-6 or another, less commonly used plastic and therefor very difficult to recycle. (Eco Reading, 2007) 5 Stages of Plastic recycling Stage one – Sorting the plastic In the first stage the plastic is collected by the recycling company and gets to the recycling plant. At the plant the plastic gets sorted out into specific types of plastic. In total 7 different numbers which are used to specify, which kind of plastic is maintained, can be identified: The problem in plastic recycling is that mixed recycled plastic cannot deliver good quality in manufacturing, therefore it is sometimes difficult or impossible to recycle the plastic to produce new plastic out of it. Recycling companies must therefore pay attention especially to sort out waste plastic. Stage two – Washing Waste Plastic Once the plastic has been sorted out, the washing process begins. Paper labels get removed, as adhesives and other impurities. Any third-party product on the plastic will lower the quality of the recycled plastic. StageThree- Shredding the Plastic In the third step the plastic is getting shredded through huge hoppers that funnel the clean scrap towards rotating metal teeth. The plastic is ripped in to small pellets, which are bagged and tested afterwards. Stage Four – Identify and Classify the Plastic After being bagged the plastic is getting tested chemically and labelled to its exact specification. Either the rGrade plastic can be used for manufacturing by adding a mix of virgin plastic, or it can be further recycled. Stage Five – Extruding In the last step the clean shredded plastic is going to be extruded in to form of pellets, so that it can be either used for manufacturing of for further recycling. (Daniel Marriott, 5 Stages of Plastic Recycling Process 2011) 4.1 CARS checklist on „5 Stages of the Plastic Recycling Process†. CREDIBILITY: -Trustworthy source: PR Log is an online press release distribution and press release submission service. Main objective of this site is to publish news from all over the world in the industry sector. The article â€Å"5 Stages of the Plastic Recycling Process† is supported by the company â€Å"Ck Polymers†, which is a multi-national distributor of rGrade plastic. Therefore we can call this source trustworthy. – Author’s credentials: The author â€Å"Daniel Marriott† is mentioned, it is possible to contact him via email through a hyperlink and via his phone number. 0845 8730037. As a conclusion it can be said, if further questions are necessary, it would be possible to contact the author. – Evidence of quality control: This article was published on the online site  of â€Å"PR Log† and is supported by the company â€Å"Ck Polymers†, which makes sure that the quality of the article is given. – Known or respected authority/organizational support: â€Å"PR Log† is a registered company and all the published content must be controlled. Furthermore it is supported by the company â€Å"Ck Polymers†, which is in the recycling business. Conclusion: The CREDIBILITY of this article is given. ACCURACY: – up-to-date: The article was published in October 2011, we can not call this up-to-date, on the other hand it can not be called old, because the process has probably not changed. – factual/detailed/exact: This article only contains facts , is very detailed and exact about the whole process and the five steps. -comprehensive: The article is very easy to understand and to read , which makes is very comprehensive.the -Audience and purpose reflect intentions of completeness and accuracy: This article supports my own research, as it is giving me important facts about the plastic recycling process. Conclusion: the ACCURACY of this research is given. REASONABLENESS: -Fair/ Balanced/ Objective/Reasoned: This document has been written in a very objective way, reasoned by facts, which have been researched through the company â€Å"Ck Polymers†, which exerts the written process. Furthermore the article is fair and balanced as no one is getting offended. -No conflict of interest: No conflict of interest can be found in the article, as it is only informing about a possible recycling process. No one gets offended. -Absence of fallacies or slanted tone: No slanted tone against anyone was found in the article, which makes it very objectively. Conclusion: The REASONABLENESS of this research is given. SUPPORT: – Listed sources: At the end of the article three hyperlinks can be found, leading to â€Å"Ck Polymers†, where the information is coming from. – Contact information: Either the possibility is given to contact directly the author of the article, or through the hyperlink from the company â€Å"Ck Polymers†. Conclusion: the SUPPORT of this research is given 4.2 Literature Review on „5 Stages of the Plastic Recycling Process†. What is the specific topic of this article? The topic of this article is the five step plastic recycling process. What is the objective of this article? The objective of this article is to provide information about how the five step plastic recycling process works in practice. What are the theoretical assumptions? Assumption 1: Plastic recycling is a great economically opportunity. Assumption 2: The recycling process is simple and effective. How do the theoretical assumptions fit to your research? The theoretical assumptions do fit my research, because it answers the sub question â€Å"How can we recycle plastic?† The article shows me a clear opportunity how to recycle plastic? Is there reference to specific concepts of theories/ What are the sources of information the author used? There is a reference existing, linking to a company using the five step recycling process. The author is basing his information on this source/company. What is the research method? The research method is secondary research, the author made a research by contacting the company to get detailed information. Which type of material does the article present? The article presents detailed knowledge about the recycling process. How did the author analyze and present the data? The data were presented relying on facts through expertise from the company â€Å"Ck Polymers†, so the author based the article on the expertise of the company. Does the author describe how the data could be interpreted? An interpretation is not available, the article only gives information about the five step recycling process. What are the main conclusions in the article? The main conclusion in this article is that we can make the difference between 7 different numbers every plastic material contains for the recycling process. Furthermore we get a detailed explanation about the five  step process, in which the plastic gets sorted, washed, schredded, identified/classified and finally extruded. The end product is called rGrade plastic, which can either be manufactured by adding virgin plastic, or being used for further recycling. 5. Summary of the article â€Å"Startups make plastic rubbish to oil†. This article is about the possibility to transform plastic rubbish into oil. Oil is one of the most used and important products and nowadays called the â€Å"black gold†. Oil relies on 10% of the world wide plastic production, so the main question should be. Why don’t we recycle it back to oil? The possibility for this recycling process is given now. Pioneer companies as â€Å"Agilyx† and â€Å"Vadxx† developed a process, in which plastic can be transformed to oil again. The result is out of 5 kilogram plastic, 3,8 liter oil can be won.. Looking at the yearly production of 265 million tons of plastic, which moves right away to our garbage 1.5 billion barrels of oil, could be recycled. Only in Europe around 70 million tons of plastic rubbish are ending up on landfills. Looking at the actual landfills, which could be seen as giant oil pits. The process is simple. In a first step the plastic gets assorted. In the second step the assorted plastic gets shredded and heated up to 400 degrees. The resulting synthetic gas cools down and is transformed into the end product, oil. According to â€Å"Agilyx† 75% of the oil, which is located in the plastic, can be recycled. Not forgetting the CO2 emission, which is 60 % lower as if we would simply burn the plastic. (Innovation: Startup makes plastic to oil, 2013) Meanwhile this plastic recycling noise is spreading all over the world. In Germany for example the company â€Å"Nill Tech† situated in Mannheim has opened a factory, which is using the same procedure.(Company in Mannheim makes plastic to oil, 2013) 5.1 CARS checklist on â€Å"Startups make plastic rubbish to oil† and â€Å"Company in Mannheim makes plastic to oil†. CREDIBILITY: – Trustworthy source: Both articles are written by the German author â€Å"Benjamin Reuter†, who is working for the magazine â€Å"Wirtschafts Woche Green† , the information are coming from an interview with the named companies, which makes the article trustworthy. – Author’s credentials: Unfortunately, no details about the authors can be found in the report itself, only his name. More information about the author can be found through the Magazine â€Å"Wirtschafts Woche Green†. – Evidence of quality control: This article was published on the online site of the magazine â€Å"Wirtschafts Woche Green†, this magazine is focusing on reporting over innovative technologies and companies. A quality control is guaranteed. – Known or respected authority/organizational support: The magazine â€Å"Wirtschafts Woche Green† is a registered company, which means that the all the online articles are controlled. Conclusion: The CREDIBILITY of these articles are given. ACCURACY: – up-to-date: The articles were posted on January 2013, 11 month ago. – factual/detailed/exact: These articles were made from interviews with the named companies concerning their technology and procedure. -comprehensive: These articles can be called comprehensive as a lot of important information for my report are given. -Audience and purpose reflect intentions of completeness and accuracy: These articles supports my own research, as it gives all detailed information about the possibility , how to recycle plastic. Conclusion: the ACCURACY of this research is good. REASONABLENESS: -Fair/ Balanced/ Objective/Reasoned: These articles are fair, balanced,  objective and reasoned, as direct information from the mentioned companies were given. -No conflict of interest: These articles do not contain any conflict of interest, as it is written to inform public and does not offend anyone. – Absence of fallacies or slanted tone: No slanted tone was found in these articles. Conclusion: The REASONABLENESS of this research is given. SUPPORT: – Listed sources: a list of references is not given. – Contact information: No contact information of the authors, only the magazine can be contacted directly. Conclusion: the SUPPORT of this research is partially given 5.2 Literature Review on â€Å"Startups make plastic rubbish to oil† and â€Å"Company in Mannheim makes plastic to oil†. What is the specific topic of this article? The topic of this article is the process making oil out of recycled plastic. What is the objective of this article? The objective of this article is to provide information about how the process making oil out of recycled plastic works in practice. What are the theoretical assumptions? Assumption 1: Recycling is a great opportunity to gain raw material. Assumption 2: Oil is one of the most important resources nowadays. Assumption 3: The resource oil will even become more important in the future. How do the theoretical assumptions fit to your research? The theoretical assumptions do fit my research, because it answers the sub question â€Å"How can we recycle plastic?† and â€Å"Which are the best possibilities to recycle plastic?† The article shows a clear opportunity how to recycle plastic and make oil out of it again. As Oil is an important resource nowadays it can be seen as the best possibility together with the five step process of recycling plastic. Is there reference to specific concepts of theories/ What are the sources of information the author used? The article contains a link to the companys â€Å"Agylix† and â€Å"Vadxx†, which can be seen as a reference. The recycling process is explained with a video, which can also be seen as a reference. The sources the author used are definitely coming from the above mentioned companies. What is the research method? The research method is secondary research, the author made a research by contacting the company to get detailed information. Which type of material does the article present? The article presents detailed knowledge about the recycling process. How did the author analyze and present the data? The data were presented relying on facts through expertise from the company â€Å"Agylix† and â€Å"Vadxx†, so the author based the article on the expertise of the company. Does the author describe how the data could be interpreted? An interpretation is not available, the article only gives information about the recycling process making oil out of plastic. What are the main conclusions in the article? Main conclusion of the article is that there is possibility to get oil out of recycled plastic. Oil is one of the most wanted resources nowadays. Pioneer companies made it possible to develop a process, where 3,8 liter oil can be produced out of 5 kilogram of plastic. Furthermore the process is being explained, working as follows: The plastic gets assorted and shredded. The shredded plastic is going to be heated up by 400 degrees. Due to this heating up process, results synthetic gas. In a next step the synthetic gas cools down and results into oil, which can be used again. A last point is the CO2 emission, which is 60%, then if the plastic would simply be burned. 6. Plagiarism First of all what is Plagiarism? Definition found on â€Å"Dictionary.com†: Plagiarism is an act or instance of using or closely imitating the language and thoughts of another author without authorization and the representation of that author’s work as one’s own, as by not crediting the original author. In short, plagiarism is all about stealing someone else’s work and lying about it afterwards. During my research on how to recycle plastic rubbish, I tried to prevent plagiarism by summarizing the article into my own words. Furthermore every used source is given in APA style, at the end of the text. In short I used someone else’s knowledge, but summarized it into my own words. 7. Research ethics According to the known information the used sources did not break any common research ethics. The author of this research used information, which were freely obtainable for everyone on the Internet. In order to prevent plagiarism and only use the sources for knowledge and information, no common research ethics was broken. It was not necessary to ask permission to use the mentioned sources. 8. Discussion and Conclusion Then the research question was formulated: â€Å"What should we do with our plastic rubbish?† Furthemore three subquestions were formulated: â€Å"What is the current situation and why is it like that?† â€Å"How can we recycle our plastic rubbish?† and â€Å"Which are the best possibilities to recycle plastic?† The main research question was â€Å"What should we do with our plastic rubbish?† The first sub question â€Å"What is the current situation of plastic pollution?†, was answered as follows: It was found out that the actual situation is catastrophic and is even getting worse. 60 to 80% of marine debris are in direct contact with plastic pollution, the 5 largest gyres of our oceans show an enormous concentration of plastic pollution. This high concentration of plastic pollution results into our food chain being affected and finally being the cause for several diseases for animals and humanity. This fact lead to the next sub question, â€Å"How can we recycle our plastic rubbish?† The answer to this question has been found in the two other summarized articles. It has been found out that there are companies, which are specialized in plastic recycling, following a five step process. In this five step process the plastic gets sorted, washed, schredded, identified/classified and finally extruded. The end product is called rGrade plastic, which can either be manufactured by adding virgin plastic, or used for further recycling. This further recycling leads us to a second effective possibility of plastic recycling. Transforming plastic into oil, which is one of the most wanted resources nowadays. Pioneer companies made it possible to develop a process, where 3,8 liter oil can be produced out of 5 kilogram of plastic. This process works as follows: The plastic gets assorted and shredded. The shredded plastic is going to be heated up by 400 degrees. Due to this heating up process, results synthetic gas. In a next step the synthetic gas cools down and results into oil, which can be used again. An important aspect of this process is also the CO2 emission. It uses 60% less CO2 emission, then if the plastic would simply be burned. The last sub question â€Å"Which are the best possibilities to recycle plastic†, has also been answered. We can say that the â€Å"five step recycling process† is the basic, which should be consequently applied all over the world. The possibility to gain oil out of used plastic again, should be seen as a continuation on the â€Å"five step recycling process†. To answer the main question â€Å"What should we do with our plastic rubbish?† It can be said that the answer is recycling as much as possible. Recycling due to innovative techniques, which can be further developed and ameliorated. The reason humanity has to focus on plastic recycling is not only because of the fact humanity is polluting his earth, which is our source of life. Furthermore the wasteful use of resources will create economical crises, prices of essential products will rise into immeasurable circumstances and make life on earth much harder. All people do need to start thinking long-term and more important in a sustainable way! 9. Reference List 9.1 Summaries, Literature review Catto Fellowship Program (2012). â€Å"Global declaration on plastic pollution† SUBMISSION TO UNITED NATIONS CONFERENCE ON SUSTAINABLE DEVELOPMENT In advance of the rio earth summit. Written on June, 2012, from http://www.uncsd2012.org/content/documents/621Cattos%20Plastic%20Pollution%20 Submission.pdf Benjamin Reuter (2013). Wirtschafts Woche Green, Startup company makes plastic to oil. Written on January, 2013, from http://green.wiwo.de/kreislaufwirtschaft-plastikdeponien-werden-zu-olfeldern/ Benjamin Reuter (2013). WirtschaftsWoche Green, Company in Mannheim makes plastic to oil. Written on January 31, 2013, from http://green.wiwo.de/innovation-fabrik-in-mannheim-macht-plastikmull-zu-ol/ Daniel Marriott (2011). Pr Log, 5 Stages of the Plastic Recycling Process. Written on October 27, 2011, from http://www.prlog.org/11708649-5-stages-of-the-plastic-recycling-process.html 9.2 Other articles Technikatlas.de. Plastic recycling from http://www.technikatlas.de/~tb4/recycling.htm Diana Bocco & Bronwyn Harris (2013). How is plastic recycled? Written on December 20, 2013 from http://www.wisegeek.org/how-is-plastic-recycled.htm Eco Reading (2007). Reading Recycles 1-7 Plastic. Written on June 7, 2007, from http://ecoreading.blogspot.nl/2007/06/reading-recycles-1-7-plastic.html Ck Polymers. Website from recycling company : http://www.ckpolymers.co.uk/ http://www.ckpolymers.co.uk/polymers http://www.ckpolymers.co.uk/polymers/plastic-identification-information 9.3 Pictures Front page picture: https://www.google.nl/search?hl=de&site=imghp&tbm=isch&source=hp&biw=1280&bih= 621&q=Plastikm%C3%BCll&oq=Plastikm%C3%BCll&gs_l=img.3..0l10.2259.6057.0.6372.13.10.1.2.2.0.119.949.7j3.10.0†¦.0†¦1ac.1.27.img..0.13.998.sgL6hhgqFyY#facrc=_&imgdii=_&imgrc=UKWSgudQNm8SGM%3A%3BIHIxbqd3Gq6txM%3Bhttp%253A%252F%252Fwww.wz-newsline.de%252Fpolopoly_fs%252F1.1289863.1365710844!%252FhttpImage%252FonlineImage.jpg_gen%252Fderivatives%252Flandscape_550%252FonlineImage.jpg%3Bhttp%253A%252F%252Fwww.wz-newsline.de%252Fhome%252Fpolitik%252Fvermuellte-meere-kampf-gegen-kostenlose-plastiktueten-1.1289876%3B550%3B328

Prince George's County Community Hazards Research Paper

Prince George's County Community Hazards - Research Paper Example The county has been affected by a number of hazards which has resulted of loss of property and even lives. Some of these hazards are related to weather which have caused injuries and deaths to the people. Moreover, it is evident that the public are not informed about certain hazards and how to manage the same in the places in which they live in. According to report released by FEMA higher percentage of people are likely to build in floodplains areas due to the fact that they are not aware of the risks associated with the same (Association of State Floodplain Managers, 2008). Therefore, it is important to inform the public about the risks associated with building in floodplain areas. However, it is has been noted that in some cases the public are not aware that they are residing in floodplain areas and they only become aware of the same after purchasing property in flood areas and suffer the effects of the floods (Federal Emergency Management Agency, 2005). In Prince George’s C ounty the risk level of the existing hazards are described as medium high. These hazards include drought, severe storm, streambank erosion and winter storm. However, the river of risks is high when it comes to coastal floods and the Riverine flood hazards. Based on this the damages caused by the aforementioned risks are calculated using damages caused to the buildings, in addition to the value of replacing the buildings and also the age of the building. However, studies have indicated that damages which are as a result of wildland fire or drought are caused by the way human population utilize land. It has been pointed out that drought as a hazard within the county impacts negatively on the planning of the place and more specifically the agricultural sector. Nevertheless, the less it is hard to mitigate the damages that are caused to crops (Federal Emergency Management Agency, 2005). Hazards such as wildland fires influence areas with grass fields, brush, crops and even tress. Apart from resulting into loss f crops the same results into economic loss not only at the personal level but also the county. Additionally, when forests are burnt the planning area of the county is interfered with and human population is likely to encroach in the land. Streambank erosion as a hazard affecting the county on an annual basis is as a result of constant and increased river discharge. This makes the hydrology of the county to change. Presently, the officials of the county have indicated that streambank erosion causes a variety of problems ranging from minor to major ones. The hazard has resulted into infrastructures an aspect that has resulted into human population encroaching land that is publicly owned. Additionally, the winter storm which is another hazard that occurs in the area on an annual basis is mostly characterized by three aspects. These are high amount of moisture, lift and cold air which not only results into precipitation but also formation of cloud. In most caus es the winter storms that affect the Maryland negatively are as a result of jet streams which are in the middle attitudes cross and move to the continental United States (Prince George's County Department of Environmental Resources, 2011). Additionally, the degree of the storm varies in addition to the impacts caused by the same. For instance within the county cases of property

Marketing Image differentiation competitive advantage Essay

Marketing Image differentiation competitive advantage - Essay Example It should be noted that in this type of differentiation strategy, the product is not tangibly different from its competitors. The marketer's primary function, then, is the addition of intangible features which would enhance the image and position of the product in the market. Tangible differentiation is much more apparent and easily identified than intangible ones. In case of toothbrushes, Colgate and Oral B are tangibly different. Oral B toothbrushes are distinctive because of the red dye in the center bristles which fades and tells customers when they need a new toothbrush. On the other hand, Colgate offers its revolutionary toothbrush that focuses on overall hygiene with its tongue cleaner. Intangible differentiation can best seen in the laptop market. It should be noted that some notebooks offered by Hewlett-Packard and Apple Computers are the same in terms of memory, connectivity, battery life, etc. However, customers are willing to pay a premium for a Mac because it is marketed as an upscale product while HP is for the mass market. The price of the notebooks together with their images in the market succeeds in creating intangible differences for the product. Extreme examples of the two products which are tangibly the same but are differentiated in the market

Statistics (Term paper) Term Paper Example | Topics and Well Written Essays - 3000 words

Statistics ( ) - Term Paper Example 32.2%) of the patients belong to the age group â€Å"25-40†, 83 (26.3%) of the patients belong to the age group â€Å"40-55† and 36 (11.4%) of the patients belong to the age group â€Å">=55†. Interpretation: From the above table (Table No.3), it is observed that 168 (53.2%) of the patients had filling as procedure of diagnosis, 25 (7.9%) of the patients had â€Å"fit or prepare crown† as procedure of diagnosis, 41 (13%) of the patients had â€Å"root canal therapy† as procedure of diagnosis and 82 (25.9%) of the patients had â€Å"extraction† as procedure of diagnosis. Interpretation: From the above table (Table No.4) it is observed that 266 (84.2%) of the patients had reported success of the anaesthesia in killing pain and 50 (15.8%) of the patients had reported failure of the anaesthesia in killing pain. The pain level was divided into three groups based on the intensity of the pain. Pain levels 0, 1 and 2 were coded as â€Å"Low†, pain levels 3,4,5 and 6 were coded as â€Å"Medium† and pain level 7,8, 9 and 10 were coded as â€Å"High†. Interpretation: From the above table (Table No.5) it is observed that 184 (58.2%) of the patients had low pain, 70 (22.2%) of the patients had medium pain and 62 (19.6%) of the patients suffered from high pain. From the above chi square analysis table (Table No.7), since the chi square observed value (243.342) is much greater than the expected value (5.99) with probability less than 0.01 (

Analyzing the Bull Profile Series by Roy Lichtenstein Essay

Analyzing the Bull Profile Series by Roy Lichtenstein - Essay Example Or, it could be a sequential explanation on how Liechtenstein transformed his subject, an everyday bull that looks uninteresting to a more vibrant and beautiful art form. The artwork as a whole fits into the sequence created by the exhibition space because it was able to successfully tell a narrative that the audience understand. In this case, it is the transformation of the bull to an interesting art form. Or it could also be a tutorial or an illustration on how Liechtenstein create his artworks by breaking the elements of the bull in each sequence and then adding distortion and color to breathe life to the subject. It has to be understand that the sequence created by the exhibition space is meant to tell a story. Such exhibition space can range from the walls of a gallery to the sketch pad of the artist or even the monumental walls of Egypt where the sequence of hieroglyphic fitted the exhibition

Case study Memo Example | Topics and Well Written Essays - 250 words

Memo - Case Study Example The analysis used the average return (AR) as the dependent variable and four other independent variables two of which were converted to dummy variables in order to capture their effect on mutual funds returns. There were forty-five funds analyzed with an average Net Asset Value of 28%, an average ER of 0.9%, and an average AR of 2.4%. The value of NAV after the first regression disqualified it as being statistically significant in influencing the variability of AR. After the second regression, which excluded NAV, the six variables had a 95% confidence interval and thus were statistically significant in explaining the variability of Average Returns of a mutual fund. Using the six independent variables, an equation that explains the following was obtained, and it helped to explain the following: The above results point out that the company should emphasize on the six funds that have a significant effect on mutual funds and that the most suitable found to invest in is the four star fund which has the highest amount of

Phenomenological, ground theory and ethnographic differences Essay

Phenomenological, ground theory and ethnographic differences - Essay Example Despite the strong similarities, grounded theory and phenomenology have several differences. One of the differences is based on sources of data and method of data collection. Grounded theory utilizes any data and explanations that contribute to knowledge acquisition in a particular study. In essence, grounded theory admits any information that is relevant to the study. Methods used in data collection include interviews, observations, and secondary sources. On the other hand, a phenomenological approach uses data from people who have real life experience with the question at hand (Grove, Burns & Gray, 2012). The approach discriminates data from other sources. This means that the approach uses historical facts. Thus, data is often extracted using interviews. The discussion shows that the two approaches have a high similarity index. The similarity is visible in data collection and analysis in that both methods seek to make conclusions based on descriptions from the raw information. However, the approaches are different in terms of sources of data. Grounded theory utilizes data from any sources whereas phenomenological data uses data from persons who have experience with the aspect under

Inspirational Leaders Essay Example for Free

Inspirational Leaders Essay In 1994, the internet was fresh in the market, and it did not incorporate commerce in its operations. As a result, he saw an opportunity for a new business network, and after doing research, he made a decision of creating a space in the internet where books could be viewed by the public. This led to the creation of Amazon in 1995. Today, Amazon is widely successful and has had a great impact on the organizational culture of internet business. Jeff Bezos is considered to be the founder of e-commerce, remains a pioneer in the industry (Inc, 2009). This paper will discuss how the culture of Amazon has changed as a result of Jeff Bezos presence; today, among many things, the public can view full book lists on Amazon, a mission that was impossible before the early 1990s. Organizational Culture Organizational culture can be related to how an organization organizes itself based on its rules and beliefs; therefore, culture gives an organization an identity. The behavioral patterns of an organization are represented in their norms; according to Kratschmer (2011, p. 2), organizational culture includes values that are shared among the members of an organization. Needless to say, organizational culture can be changed. Kratschmer (2011, p. 3) adds that, organizational culture can be changed and lead to success, only if well managed. In addition, resistance to change is expected in any organization mainly because the employees are already attached to the existing culture; hence, they may resist change for fear of the unknown. Needless to say, changes in organizational culture can be of great benefit, for instance, it may contribute to new knowledge and skills for the employees, and productivity is achieved through motivating employees. Finally, as employees adapt to change, flexibility is achieved, which leads to improvement. However, for organizational culture to be successful, effective leaders must be in place. Culture is very important, as it promotes healthy competition at the place of work, hence motivating employees to perform. A healthy culture promotes employees’ interaction at the place of work, therefore uniting them despite their different backgrounds. Providing employees with a favorable working place increases their productivity. Schein (2010, p. 80) adds that, the shared values and beliefs in an organization are important, as they determine how goals are met. Moreover, a strong culture retains talents, engages employees, creates energy, changes how work is viewed, and contributes towards cooperation at the place of work. Jeff Bezos is one of the few inspirational leaders who have contributed to change of culture in Amazon, leading to the success of the business. Amazon and change in organizational culture When Jeff Bezos discovered the potential of the internet in 1994, nothing held him back from introducing commerce in the system; he abandoned a well-paying job and concentrated on Amazon. Today, amazon. com is one of the internet giants, fostering online retail and an e-reader. Indeed, he is among the founders of e-commerce (Inc, 2009). Within 30 days, he had sold books in all the American states and in 45 countries, with sales worth $20,000 weekly. Since then, the growth of Amazon continuously accelerated, but it 1997, he announced that the company would be unprofitable for some time. However, in 2003, Amazon made its first annual profit, contributing to revenue of $4billion by 2008 (Inc, 2009). The company has embraced e-commerce, and Bezos’ will to start an online bookstore has yielded to a diverse selection of books. Today, he is the founder and chief executive officer of Amazon. com. According to Katzenbach (2008, p. 6), Jeff Bezos insists on fostering positive motivation, which does not involve money. Employees are likely to be motivated to performing their tasks if they are committed and disciplined. Ensuring that respect is fostered among employees will help in maintaining a positive working environment. Amazon. com recognizes employees’ effort by giving a specific employee an award on monthly basis for the capability of making significant savings. Amazon’s culture includes an informal, but effective environment, one that involves fun; this company is obsessed with customers. Therefore, it continuously improves its website and its systems with an aim of serving customers quickly and reliably. It also strives to maintain its culture, which includes talented personnel, who are creative and innovative in finding solutions to challenges (Lussier, 2011, p. 56). Therefore, it is evident that a strong culture is influenced by effective leadership. According to Dubrin (2011, p. 291), the strong organizational culture fosters quality, productivity and morale; such a culture values human dignity, and therefore, it fosters job satisfaction and increases employee motivation. Jeff Bezos has noted that a culture that involves experimentation is crucial in the continuously changing world. Invention may lead one to paths that are considered weird by the world (Dubrin, 2011, p. 291). Before the existence of Amazon, click shopping did not exist; these are some of the changes brought about by Amazon. The company also deals with online shopping for electronics, computers movies, games, music, as well as books. Amazon, being one of the web giants, implies that an effective leader must be diverse, being behind such a company that started very small and transformed into a giant. Bezos is regarded as visionary, but he is keen that his employees meet the demanding schedules; weekly management meetings are set with his managers. In addition, he encourages his employees to be innovative, and a reward program has been implemented that rewards innovative employees (Zakomurnaya, 2007). Moreover, the company hires intelligent and innovative personnel; indeed, Bezos would rather not hire anyone rather than hire the wrong person. Bezos is also approachable and easy -going, which makes him an effective leader. In 2007, Amazon introduced a hand-held electronic book reader, which uses E-ink to bring out a print-like appearance and has no strain on the eyes. In addition, the introduction of I-pad to the world was seen as direct competition for Amazon, therefore, Jeff introduced Kindle Fire, which shares many of the same features as I-pad, but is much cheaper. The Amazon kindle fire is an e-book reader, which is a small hand-held device; this is as a result of technological advances. Nevertheless, these e-book devices are expensive, but advantageous compared to paper copy; indeed, technology has changed in the digital reading world. Another advantage is that these e-readers can be borrowed from libraries. According to Mc Graw Hill (N. d, p. 3), kindle fire is competitive compared to other e-book readers. In 2007, Amazon. com created a successful e-bookstore that allowed client access from any computer or from e-book reader model. Amazon has therefore made book reading easier, and the kindle e-book can be referred to as published. Amazon. com offers a collection of above two million free e-books with titles; therefore, Amazon has succeeded in improving the digital world by providing e-book readers, which assist online clients in accessing digital e-books. For instance, the kindle e-Book reader has a rechargeable battery, which is built in and has a wide internal storage that can fit 1000 full-length books (Mc Graw Hill, N. d, p. 5). Another advantage of owning kindle fire e-book reader is that, the kindler-formatted e-books are easily accessed. In addition, kindle fire can be used as a form of an entertainment device, which allows one to surf the web, send, and receive emails, among other functions. Therefore, Amazon’s Kindle fire is a device of many functions, which is a competition for I-pad among other devices. Amazon prime is a membership program, which enables individuals to receive unlimited fast shipping. Members enjoy a variety of services, which include unlimited and instant streaming of above 10,000 movies and television shows. Amazon prime offers a wide variety of kindle books through the kindle lending library; members who own kindle devices benefit more from reading and borrowing books for free. In addition, members of Amazon prime enjoy free shipping for orders that are above $25, a relatively good deal for customers. Moreover, Amazon prime enables one to try free shipping for one month, and ensures that customers save by spending less, and save time by guaranteeing two day shipping. It also provides unlimited deliveries, hence guaranteeing convenience. Big online shoppers benefit the most, and this is because of the unlimited deliveries that guarantee quality of members’ money. With a range of affordable entertainment, free movies, free kindle e- books, and a two-day shipping for only $75, Amazon prime is a friendly program. Therefore, Jeff Bezos’ intervention has led to a variety of services and products that blow the clients’ minds away. It is this transformation from a small enterprise to an internet giant that has led to a change in culture at Amazon. Conclusion Jeff Bezos, the founder and the chief executive officer of Amazon. com is a visionary, and has contributed to the success of this company through motivating employees with rewards, as well as ensuring that customers’ demands are met. He is an inspiring leader, and despite the fact that he does not value communication, he believes in the â€Å"just-do-it† aspect that motivates employees to perform. Jeff is not limited to only e-books, he has also engages in online retailing of music, movies, clothes, and streaming television shows. The unveiling of kindle fire in 2007 is among his achievements; Amazon prime has also been a competitive advantage for the company and has attracted many members. A strong organization culture requires an effective leader; Amazon is one successful company that has been influenced by an inspirational leader. Indeed, Jeff has contributed to various changes in the organization, which have contributed to successful culture in the organization.

The Modern Prometheus Essay Example for Free

The Modern Prometheus Essay I always saw my monster as something inarticulate, helpless and tragic. To him, Frankenstein was God. Boris Karloff (on his portrayal of Mary Shelleys monster). Who or what, in your opinion, is the real monster in Frankenstein? Ever since Mary Godwin wrote the first edition of Frankenstein, as a then unmarried 19yr old girl, people have been voicing different opinions over who is the real monster in the novel. Since the first writing of the novel, it has been rewritten and reworked into many different films and plays. Many of these do not follow the storyline of the book exactly and often portray the monster as a savage beast who has no self-control, knowledge, understanding and, most of all, feelings. Mary Shelley rewrote her first edition in 1831. This volume is more conservative and does not shock the reader as much as the first edition did. It portrays Victor more sympathetically and the monster more intellectually gifted than the first version. Mary Shelley illustrates many opposites in this novel: good and evil; creator and creature; monstrous and human. But the theme I will be looking at in detail is villain and victim, which relates to the original question of who is the real monster or villain. The dictionary defines a monster as an Inhumanly wicked or cruel person; A misshapen animal; A large, hideous animal or thing. This definition seems to imply that the exterior reflects the interior, or that a frightening external appearance conceals a wicked character. The creature in this novel has the notorious reputation for being the monster, but is this really justified? The first key passage describes the creation of the monster. Shelley builds up atmosphere at the start of the chapter by her description of the weather and surroundings, It was on a dreary night of November. This contrasts with Victors anticipation. He has been waiting his entire life for a chance to create life and now his workings reach a climax. This part of the novel is also a climax for the reader. But once Victor has seen the creature he has created, he is flooded with a huge feeling of anti-climax. The creature repulses Victor on sight. He refers to the creature harshly as the wretch and is completely horrified by the thing he has just given life to. This shows that Victor is only concerned with physical appearance. This is the same as when he was studying at the university in Ingolstadt. He was so disgusted with the appearance of his tutor M. Krempe that he delayed going to his first lecture for a few weeks until he was sure that another tutor was giving the lecture. This shows intolerance of imperfection and a flaw in Victors character. Shelley advances a criticism of intolerant and superficial societies that place emphasis on appearance. Victor rejects his creation. This is like a father rejecting his child. He had to initially resort to grave robbing to obtain the material needed to create his creature. Perhaps, when the creature came to life, Victor realised the enormity of the monstrous deeds he had committed. This passage shows Victor to be a monster, as he does not even try to understand the creatures cries for help. He has forsaken any duties he is expected to perform as a father. When the creature awoke from his sleep he convulsed. When Victor awakes from his sleep, all his muscles convulse also. These could be the first signs that the creature is the other side of Victor, the side that does all the things he cannot bring himself to do. When Victor sleeps, he has a dream. This dream could be seen as prophetic. Maybe Victor is associating the birth of the creature with the death of Elizabeth. Shelleys description of the monster is full of pathos. The first things that the creature wants are contact and affection, as any newborn thing wants, but his creator or father, Victor, denies him this. When Victor awakes from his dream, he finds the creature standing nearby, reaching out a hand towards him. Victor rejects this appeal for help and recognition. This passage may parody The Creation of Man by Michelangelo, which is on the ceiling of the Sistine Chapel. It shows God stretching out his hand to give life to Adam. The analogy of this is that Victor is playing God and the creature is Adam. Another parody is the story of Prometheus who stole fire from the Gods and gave it to the people on earth. Victor has stolen the power of life from the Gods and given it to the people. This is why the books title has the subtitle The Modern Prometheus.